Bristles - also known as hairs. Can be natural, synthetic, or combination of both. Ferrule - the silvery bit that connects the bristles with the handle. Crimp - the part of the ferrule that secures it to the handle. Handle - usually made of wood or acrylic. So now that you know the lingo, let's find out what each brush is meant for! Acrylic Paint Brushes.

• Clip Studio Paint Blending Brush
• Paint Brush For Blending
• Round Blending Paint Brush

The Loaded brush is a beautiful mystery. It combines multiple techniques into one motion that when properly affected can produce beautiful results. This method was pioneered by Mr. Ben Komets in the miniature painting world and has captured the imaginations of many.

Clip Studio Paint Blending Brush

1. For Artisan Water-Mixable Oil Color Winsor & Newton developed the Artisan range of brushes to achieve the best possible results when painting with Artisan Water Mixable Oil Colour. The brushes are made using a unique blend of high quality synthetic fibres which are designed specifically to have.
2. Later you can use a smaller, textured brush to blend the edges. No Smudge Tool, no soft brush, just the Eyedropper Tool and your hard brush with variable Flow. Remember: blending depends on the texture of the surface, so you can't use the same way of blending for every material! Using 2D Textures for 3D Forms.
3. With the right materials and techniques, it’s possible to use acrylics to create a smooth blending effects similar to oils. The blending techniques that you use depends upon your style and the types of acrylics that you prefer. For variety, I also include blending techniques that allow the brush strokes to show.

This is a stunningly tricky technique though that can be reproduced with some time and practice. Once again I’d like to reemphasize that this is a technique that has been done for a long time in the traditional art world. If they can do it so can we!

So let’s jump into the technical side of things. What is happening frame by frame with Loaded Brush blending? If this is your first time here and you’re looking to learn the Loaded Brush I would highly recommend checking out the articles on Feathering and Wet on Wet blending first as they are the two building blocks for this technique.

Feathering left and Wet on Wet to the right

So we have our pallet and brushed at the ready and we’re going to practice loaded brush blending on our flat surface. We need two things on the pallet.

1 – A color that will be loaded into the brush (any color will do).

2 – Some kind of thick artist acrylic for the highlight or shadow. ( I use Schmincke, Golden is another great brand)

Next we need to thin down our color, there is a lot of variance in this and from experience I can say it needs to be somewhere in the thick to thin layer consistency. The paint needs to have some kind of body in the brush.

Next we remove some of the paint to find the right amount. The brush needs to keep paint on it but not be dripping paint off of it. But it also needs to not just be damp with the color.

After this we grab a bit of white on the tip of the brush. This tip should be some what spherical in nature but there is quite a bit of leeway. This can be a highlight or shadow color.

So we’re all set up and ready for action what next!?

We’ve come to the actual action of application.

First the white should be set down and then in the same zig zagging feathering motion draw out the highlight. While this is happening the back end of the brush is being set on the surface to allow the color to create the wet surface for the highlight to diffuse through.

The feathering action is continued to assist in the creation of the transition

Alternatively if there is just a small amount of color on the tip then the brush hairs can be splayed with more pressure allowing the paint to come forward onto the surface. The feathering motion stays the same.

Paint Brush For Blending

Here’s a gif of a second loaded brush. Each one will beu unique in a way depending on the amount of color on the tip and the size of the surface worked upon

Any problems in the transition can be cleaned up with Glazing.

Drivers fluke port devices. The key here is to practice. Here’s the bust that was practiced on it took a lot of trial and error and a lot of time. If it doesn’t happen in the first 5 tried do it 5 more times. Play with the consistency of the paint, play around with the tip shape. Just don’t give up to quick!

There is no magic formula though except to learn by practicing.

Round Blending Paint Brush

Hopefully this article has been helpful in explaining the details of it. It’s certainly a tricky technique that even takes some warming back up to for myself. But i’m confident after a little work you can start to achieve some fantastic results! For even more examples from Master Ben himself check out this video here.

If you liked this and want more come support me at my Patreon for as low as 5$!

Here’s the Gif again at half speed